Service Manual

Groundsmaster 4500--D/4700--DCutting Units (Rev. B)
Page 8 -- 8
Service and Repairs
CAUTION
Never install or work on the cutting units or lift
arms with the engine running. Always stop en-
gine and remove key first.
Blade Spindle Assembly
1. Flange nut
2. Socket head screw (motor mounting)
3. Spindle plate
4. Cutting deck
5. O--ring
6. Spindle assembly
7. Cap screw
8. Cutting blade
9. Anti--scalp cup
10. Blade bolt
11. Rubber flap (if equipped)
12. Flap plate (if equipped)
13. Pop rivet (steel) (if equipped)
Figure 3
1
2
3
4
6
7
8
9
10
11
12
13
5
FRONT
RIGHT
85 to 110 ft--lb
(115 to 149 N--m)