Service Manual

Groundsmaster 3500- D
Page 3 - 14
Kubota Diesel Engine (Rev. G)
Radiator and Oil Cooler Assembly (Serial Number Above 314000000)
Figure 18
1. Expansion tank
2. Hose clamp
3. Coolant hose
4. Flange head screw
5. Radiator bracket - RH
6. Carriage bolt
7. Flange nut
8. Radiator bracket - top
9. Flange head screw
10. Frame casting
11. Cap screw
12. Radiator
13. Straight fitting
14. Draincock
15. Lower radiator shield
16. Radiator bracket - LH
17. Elbow fitting
18. Magnet
19. Radiator bracket - bottom
20. Lower fan shroud
21. Upper fan shroud
22. Hydraulic tube
23. Hydraulic hose
24. Lower radiator hose
25. Hose clamp
26. Hex nut
27. Relay
28. Upper radiator hose
29. Flange nut
30. Straight fitting
31. Expansion tank support
32. Flange head screw
13
1
FRONT
RIGHT
2
3
4
5
6
6
6
7
8
7
9
9
10
11
12
7
13
14
15
16
17
18
19
7
20
21
22
23
24
25
26
27
28
25
29
30
9
32
31
NOTE: On machines with serial number above
314000000, the hydraulic oil cooler is combined with the
radiator as shown in Figure 18.
Removal
1. Park machine on a level surface, lower cutting units,
stop engine, engage parking brake, and r emove key
from the ignition switch.
2. Open and remove engine hood from the machine.
CAUTION
Do not open radiator cap or drain coolant if the
radiator or engine is hot. Pressurized, hot cool-
ant can escape and cause burns. Ethylene- gly-
col antifreeze is poisonous. Dispose of coolant
properly, or store it in a properly labeled contain-
er away from children and pets.