Operator's Manual
A 40 amp circuit breaker (Fig. 30) is also incorporated
to protect the entire wiring circuit. A reset button is
located on the lower side of the panel, which can be
reached after removal of the battery cover. The button
should be depressed if a total loss of all electrical
functions should occur. However, the electrical system
should first be checked to ascertain the reason for the
malfunction.
!
! !
" (Fig. 31)ĊLocated on the lower
right side of the engine inboard of the air cleaner
assembly. Provided as a means to stop the fuel flow,
thereby stopping the engine, if an electrical
malfunction should occur. Use only for emergencies.
!
"
! " (Fig. 32)ĊTo adjust standard
seat, push lever backward and slide seat to the desired
position. Release lever to lock seat in place. The
suspension seat may be adjusted forward or rearward
by pulling out the lever at the left side of the seat, sliding
the seat to the desired position, and releasing the lever.
The weight adjustment knob may be adjusted for any
operator's comfort.
!
! "