Service Manual

LINKAGE

4-52 Fixed Deck Mid-Size Service Manual

Fig 299 PICT-5556

1. Slide the spring tab end of the operator presence

control (OPC) rod through the left side opening of

the control panel. Install the right end of the rod into

the opening on the right side handle bar. Slide the

rod through the right side handle bar opening until

the left end of the rod can be inserted through the

left handle bar opening (Fig. 299).

Fig 298 PICT-5556

6. Remove the OPC rod by sliding it to the far right,

dropping the left side of the rod, and then remove

the rod through the left side opening of the control

panel (Fig. 298).

Installation

Fig 300 PICT-5554

2. Install the extension spring onto the OPC rod and

the underside of the control panel (Fig. 300).

Fig 297 PICT-5554

4. Repeat steps 1 thru 3 to remove the right side OPC

lever.

5. Remove the extension spring located under the

control panel (Fig. 297).