Service Manual

ENGINE

3-18 Fixed Deck Mid-Size Service Manual

Mid-Size Fixed Deck Engine

Installation (Hydro)

1. Position the engine onto the chassis.

2. Apply thread locking compound to the threads of all

4 engine mounting bolts.

3. Install the 4 engine mounting bolts, nuts and wash-

ers that secure the engine to the chassis. Torque the

4 engine mounting bolts to 15-20 ft-lbs. (20-27Nm).

4. Pull on the split ring and chain assembly to reduce

tension on the idler assembly. While pulling on the

split ring/chain assembly, route the traction control

belt around the pulleys (Fig. 068).

Fig 068 PICT-4747

Fig 069 PICT-4766

5. Release the split ring/chain assembly. If necessary,

adjust the traction control belt guide so that the

distance between the belt guide and belt is 1/8”

(.31cm) (Fig. 069).

Fig 067 PICT-6828

22. Loosen and remove the 4 nuts, bolts and washers

that secure the engine to the chassis and then

remove the engine (Fig. 067).