Operator's Manual
Table Of Contents
- NO TITLE
- .
- NO TITLE
- NO TITLE
- Checking the Engine-Oil Level
- Checking the Cooling System
- Adding Fuel
- Checking the Hydraulic Fluid
- Checking the Tire Pressure
- Checking the Torque of the Wheel Nuts
- Think Safety First
- Using the Operator Platform Latching Mechanism
- Understanding the Operator Presence Controls
- Starting and Stopping the Engine
- Using the Grass Deflectors
- Adjusting the Center Cutterhead Height-of-Cut Correction
- Controlling the Position of the Individual Cutterheads
- Adjusting the Cutterhead Auto Limited Lift
- Engaging the Cutterhead Drive
- Clearing the Cutting Cylinders
- Using Weight Transfer / Traction Assistance
- Folding the ROPS
- Locating the Jacking Points
- Transporting the Machine
- Loading the Machine
- Towing the Machine
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
Lubrication
GreasingtheBearings,
Bushings,andPivots
ServiceInterval:Beforeeachuseordaily
Every50hours
Lubricateallgreasettingsforthebearingsandbushings
with#2general-purpose,lithium-basedgrease.Lubricate
thebearingsandbushingsimmediatelyaftereverywashing,
regardlessoftheintervallisted.
Replaceanydamagedgreasettings.
Greaseallcutterheadgreasepointsandensurethatsufcient
greaseisinjectedsuchthatcleangreaseisseentoescapefrom
therollerendcaps.Thisprovidesvisibleevidencethatthe
rollersealshavebeenpurgedofgrassanddebrisandensures
maximumworkinglife.
Thegreasettinglocationsandquantitiesareasfollows:
G022392
1
2
Figure46
1.–Greaseevery50hours2.–Greasedaily
36