Operator's Manual
Table Of Contents
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
- Adding Fuel
- Think Safety First
- Operating the Parking Brake and Neutral Locks
- Starting and Stopping the Engine
- Operating the Blade Control (PTO) Lever
- The Safety Interlock System
- Driving Forward or Backward
- Stopping the Mower
- Transporting Machines
- Side Discharging or Mulching the Grass
- Adjusting the Wheel Drive Tension
- Adjusting the Height-of-Cut
- Adjusting the Flow Baffle
- Positioning the Flow Baffle
- Adjusting the Handle Height
- Height of Cut Chart
- How to Grease
- Lubricating the Caster and Wheel Bearings
- Greasing the Transmission Couplers
- Greasing the Mower Belt Idler
- Servicing the Air Cleaner
- Servicing the Engine Oil
- Servicing the Spark Plugs
- Servicing the Fuel System
- Checking the Tire Pressure
- Cleaning the Air Intake Screen
- Cleaning the Cooling System
- Servicing the Brakes
- Checking the Belts
- Replacing the Traction Drive Belt
- Replacing the Drive Belt
- Replacing the Mower Belt
- Adjusting the Mower Belt Tension
- Adjusting the Control Rods
- Mower Deck Maintenance
- NO TITLE
ReplacingtheFuelFilter
ServiceInterval:Every200hours/Yearly(whichevercomes
rst)
Neverinstalladirtylterifitisremovedfromthefuelline.
Note:Notehowthefuellterisinstalledinordertoinstall
thenewltercorrectly.
Note:Wipeupanyspilledfuel.
1.DisengagethePTOandsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Closefuelshut-offvalveatthefueltank(
Figure31).
4.Squeezetheendsofthehoseclampstogetherandslide
themawayfromthelter(Figure32).
Figure32
1.Hoseclamp3.Filter
2.Fuelline
5.Removethelterfromthefuellines.
6.Installanewlterandmovethehoseclampscloseto
thelter.
7.Openfuelshut-offvalveatfueltank(Figure31).
8.Checkforfuelleaksandrepairifneeded.
9.Wipeupanyfuelthatspilled.
ServicingtheFuelVentSystem
ServiceInterval:Every200hours/Yearly(whichevercomes
rst)
1.DisengagethePTOandsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Removetheexistingfuelventlter(
Figure33).
4.Installanewlter.
g014686
1 2
Figure33
1.Fuelventlter2.Rightsideofmotor
28