Operator's Manual

BrakeMaintenance
AdjustingtheService
Brakes
Adjusttheservicebrakeswhenthereismorethan
25mm(1inch)offreetravelofthebrakepedal,or
whenthebrakesdonotworkeffectively.Freetravelis
thedistancethebrakepedalmovesbeforeyoufeel
brakingresistance.
1.Releasethelockinglatchfromthebrakepedals
sothatbothpedalsworkindependentlyofeach
other.
2.Toreducefreetravelofthebrakepedals,tighten
thebrakesasfollows:
A.Loosenthefrontnutonthethreadedendof
thebrakecable(Figure74).
g009721
Figure74
1.Brakecable
B.Tightentherearnuttomovethecable
rearwarduntilthebrakepedalshave13to
25mm(1/2to1inch)offreetravel.
C.Tightenthefrontnutsafterthebrakesare
adjustedcorrectly.
BeltMaintenance
ServicingtheAlternator
Belt
ServiceInterval:Aftertherst10hours
Every100hours
Propertensionofthebeltallows10mm(3/8inch)of
deectionwhenaforceof44N∙m(10ft-lb)isapplied
onthebeltmidwaybetweenthepulleys.
Ifthedeectionisnot10mm(3/8inch),loosenthe
alternator-mountingbolts(Figure75).
Note:Increaseordecreasethealternator-belt
tensionandtightenthebolts.Checkthedeectionof
thebeltagaintoensurethatthetensioniscorrect.
g020460
Figure75
1.Alternator
3.Compressor
2.Mountingbolt4.Idlerpulley
ServicingtheCompressor
Belt
ServiceInterval:Aftertherst10hours
Every100hours
1.Propertensionofthebeltallows10mm(3/8
inch)ofdeectionwhenaforceof44N∙m(10
ft-lb)isappliedonthebeltmidwaybetweenthe
pulleys.
2.Ifthedeectionisnot10mm(3/8inch),loosen
theidlerpulleymountingbolt(Figure75).
Note:Increaseordecreasethecompressor-belt
tensionandtightenthebolt.Checkthedeection
ofthebeltagaintoensurethatthetensionis
correct.
60