Service Manual

Removal(Figure337)(continued)
1
2
(5.295 to 5.445 in)
134 to 138 mm
g277094
Figure340
1.Damperlink
2.Clevispin
3.Removehairpinandclevispinthatsecurethedamperlinktotherearof
thecuttingdeck(Figure340).
4.Removeeight(8)capscrews,lockwashersandatwashersthatsecure
deckmounttocuttingdeck(Figure338).
5.Raiseliftarmenoughtoseparatedeckmountfromcuttingdeck(Figure339).
6.Slidethecuttingdeckawayfromthetractionunit.
Installation(Figure337)
1.Positionmachineonaclean,levelsurface.Stopengine,applyparkingbrake
andremovekeyfromtheignitionswitch.
2.Positionthesidecuttingdecktotheliftarmanddeckmount.
3.Lowerliftarmwhilealigningdeckmounttocuttingdeck.
4.Installdeckmounttocuttingdeckwith(8)capscrews,lockwashersandat
washers(Figure338).Tightenfasteners.
IMPORTANT
Thelengthofthedamperlinkshouldbefrom134to138mm(5.295
to5.445in)measuredbetweenrodendcenters.
5.Installclevispinandhairpinthatsecurethedamperlinktotherearofthe
cuttingdeck(Figure340).
6.Installhydraulicmotortocuttingdeck(seeCuttingDeckMotors(page
5–155)).
7.Lubricategreasettingsoncuttingdeckandliftarmassembly.
Groundsmaster
®
4000-D&4010-D
Page9–9
CuttingDecks:ServiceandRepairs
13202SLRevE