Service Manual

LINKAGE

4-11Fixed Deck Mid-Size Service Manual

Fig 137 PICT-5791

Fig 139 PICT-5794

3. Make sure the assist arm is against the rear assist

arm stop on the deck (Fig. 137).

5. The assist arm should contact the front assist arm

stop on the deck. If it does not contact, readjust so

that the bellcrank is closer to the transmission output

shaft (Fig. 139).

Fig 138 PICT-5792

Fig 136 IMG-6022

4. Disengage the PTO (lever pulled back) (Fig. 138).2. Adjust the assist arm linkage length so that there is

1/16” to 1/8” (1.58 to 3.17mm) clearance between

the bellcrank and the transmission output shaft (Fig.

136).