Service Manual

MOWER DECK

8-67Fixed Deck Mid-Size Service Manual

Fig 1133 PICT-6007

Fig 1135 PICT-6011a

11. While securely holding the nuts, torque each of the

spindle mounting bolts to 20-25 ft-lbs (27-33.89 Nm)

(Fig. 1133).

13. Install the height-of-cut spacers onto the blade bolt

(Fig. 1135).

Note: Ensure the height-of-cut spacers are installed

onto the blade bolt to maintain the same

blade height as the other spindles.

Fig 1134 PICT-6014a

12. Install the washer (crown side facing down) and

blade onto the blade bolt (Fig. 1134).

Fig 1136 PICT-6008

14. Position the blade, blade bolt and height-of-cut

spacers up into the spindle housing assembly (Fig.

1136).