Operator's Manual
Table Of Contents
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
- Adding Fuel
- Think Safety First
- Operating the Parking Brake and Neutral Locks
- Starting and Stopping the Engine
- Operating the Blade Control (PTO) Lever
- The Safety Interlock System
- Driving Forward or Backward
- Stopping the Mower
- Transporting Machines
- Side Discharging or Mulching the Grass
- Adjusting the Wheel Drive Tension
- Adjusting the Height-of-Cut
- Adjusting the Flow Baffle
- Positioning the Flow Baffle
- Adjusting the Handle Height
- Height of Cut Chart
- How to Grease
- Lubricating the Caster and Wheel Bearings
- Greasing the Transmission Couplers
- Greasing the Mower Belt Idler
- Servicing the Air Cleaner
- Servicing the Engine Oil
- Servicing the Spark Plugs
- Servicing the Fuel System
- Checking the Tire Pressure
- Cleaning the Air Intake Screen
- Cleaning the Cooling System
- Servicing the Brakes
- Checking the Belts
- Replacing the Traction Drive Belt
- Replacing the Drive Belt
- Replacing the Mower Belt
- Adjusting the Mower Belt Tension
- Adjusting the Control Rods
- Mower Deck Maintenance
- NO TITLE
Figure49
1.Bellcrank
3.Switchmountingbracket
2.Boltsandnuts
4.Switchbody
ControlsSystem
Maintenance
AdjustingtheControlRods
1.Removethehairpincotterpinsandclevispinsfrom
thedriveleversandneutrallocks(Figure50).
g012931
Figure50
1.Controlrod
5.Neutrallock
2.Clevispin
6.Hairpincotterpin
3.OperatorPresence
Controllever(OPC)
7.Lefthandleshown
4.Handle8.Drivelever
2.Adjustthecontrolrodlengthbythreadingtherodinor
outoftherodttinguntilthereisa5to6mm(3/16to
1/4inches)clearancebetweenthecontrolrodandthe
bottomoftheneutral/parkingbrakelock(Figure51).
Figure51
1.Handle4.Drivelever
2.Neutral/parkingbrakelock
5.Forwardspeed
3.5to6mm(3/16to1/4
inch)clearance
6.Controlrod
36