Operator's Manual

24
Install Rear Weight
To comply with CEN standard EN 836:1997, ISO standard 5395:1990 and ANSI/OPEI B71.4–1999 Standard, rear weight
must be added to rear of traction unit. Use chart below to determine weight requirements. Order parts from your local
Authorized Toro Distributor.
Note: A rear weight kit, part no. 24–5780 is supplied with Model No. 30630.
Two Wheel Drive
Cutting Unit
Description
Rear Weight
Required
Weight Part
Number
Weight Description Qty.
72″ Side Discharge
(Model No. 30722)
70 lb. 24–5780 Rear Weight Kit
(two 35 lb. weights and mounting hardware)
1
72″ Rear Discharge
(Model No. 30710)
70 lb. 24–5780 Rear Weight Kit
(two 35 lb. weights and mounting hardware)
1
Guardian 72″
Recycler
(Model No. 30716)
70 lb. 24–5780 Rear Weight Kit
(two 35 lb. weights and mounting hardware)
1
72” Flex Deck
(Model 30799)
210 lb. 24–5780 Rear Weight Kit
(two 35 lb. weights and mounting hardware)
3
Four Wheel Drive
Cutting Unit
Description
Rear Weight
Required
Weight Part
Number
Weight Description Qty.
72” Flex Deck
(Model 30799)
70 lb. 24–5780 Rear Weight Kit
(two 35 lb. weights and mounting hardware)
1