Service Manual

7. Connect the tie rod end to the spindle bracket with 8. Install the lock nut and cap screw to secure the
one (1) nut. Tighten the nut to a torque of 25 - 33 ft-lb. steering cylinder rod end to the steering pivot. Tighten
Install the jam nut and tighten against the other nut to the nut to 130 to 150 ft-lb.
secure tie rod end.
9. Lubricate the bushings through the grease fitting on
the
steering pivot.
Figure 16
Groundsmaster
®
300 Series Page 8 - 13 Repairs