Service Manual

Removal(Figure114)(continued)
4.RemovehydraulicmanifoldfromtheframeusingFigure114asaguide.
5.Ifhydraulicttingsaretoberemovedfrommanifold,markttingorientationto
allowcorrectassembly.RemovettingsfrommanifoldanddiscardO−rings.
Installation(Figure114)
1.Ifttingswereremovedfrommanifold,lubricateandplacenewO−ringsonto
ttings.Installttingsintomanifoldopeningsusingmarksmadeduringthe
removalprocesstoproperlyorientatettings.Tightenttings(seeInstalling
HydraulicHosesandTubes(O-RingFaceSeal)(page5–8)).
2.InstallhydraulicmanifoldtotheframeusingFigure114asaguide.
3.Removecapsandplugsfromttingsandhydrauliclines.Usinglabelsplaced
duringmanifoldremoval,properlyconnecthydrauliclinestomanifold(see
InstallingHydraulicHosesandTubes(O-RingFaceSeal)(page5–8)).
4.Makesurehydraulictankisfull.Addcorrectoilifnecessarybeforereturning
machinetoservice.
Groundsmaster
®
4100-D&4110-D
Page5–121
HydraulicSystem:ServiceandRepairs
13203SLRevE