Service Manual

Groundsmaster 360Operator Cab Page 8 − 14

Storage Compartment

1. Cab platform

2. Storage compartment

3. Flange head screw (4)

4. Bulb seal

5. RH foam

6. LH foam

7. Foam

8. Foam

9. LH foam

10. RH foam

11. Foam

12. Tinnerman nut (4)

Figure 10

FRONT

RIGHT

Removal (Fig. 10)

1. Park machine on a level surface, lower cutting deck

(or implement), stop engine, engage parking brake and

remove key from the ignition switch.

2. Unlatch and raise operator seat.

3. Remove four (4) flange head screws (item 3) that se-

cure storage compartment to cab platform.

4. Remove storage compartment assembly from ma-

chine.

5. Inspect all sealing components on storage compart-

ment and cab platform. Replace all seals that show evi-

dence of damage.

Installation (Fig. 10)

1. Position storage compartment assembly to cab plat-

form. Secure storage compartment to cab platform with

four (4) flange head screws (item 3).

2. Lower and latch seat.