Service Manual

Groundsmaster 360 Page 3 − 5 Kubota Diesel Engine
Adjustments
Adjust Throttle Control
Proper throttle operation is dependent upon proper ad-
justment of throttle control. Make sure throttle control is
operating properly.
1. Move remote throttle control lever to FAST (detent)
position.
2. Check position of speed control lever on engine fuel
injection pump. Speed control lever should be contact-
ing high speed screw when throttle control lever is in
FAST (detent) position (Fig. 1).
3. If necessary, position of throttle control cable jam
nuts can be adjusted until speed control lever contacts
high speed screw when throttle control lever is at FAST
(detent) position (Fig. 1).
4. Make sure that cable jam nuts are fully tightened af-
ter adjustment.
Figure 1
1. Throttle cable
2. High speed screw
3. Speed control lever
4. Cable jam nut
1
4
2
3
Kubota
Diesel Engine