Service Manual

Groundsmaster 360Hydraulic System Page 4 − 84
5. Remove filter bypass plug, spring and valve from
transmission pump body. Remove and discard O−ring
from plug.
1. Filter bypass plug 2. Bypass valve
Figure 72
1
2
6. Remove pressure valve plug, spring and valve from
transmission pump body. Remove and discard O−ring
from plug.
7. Remove charge relief plug, spring and valve from
transmission pump body. Remove and discard O−ring
from plug.
1. Pressure valve plug 2. Charge relief plug
Figure 73
1
2
8. Remove two (2) bolts that secure accumulator cover
to transmission pump body.
9. Remove cover, gasket, collar, spring and piston from
pump body. For assembly purposes, note that hole in
collar is toward the outside of the pump body. Discard
gasket.
1. Accumulator cover
2. Collar
3. Piston
Figure 74
1
2
3
10.Remove two (2) hex plugs from pump body. Remove
and discard O−rings from plugs.
11.Remove four (4) socket head plugs from pump body.
1. Hex plug (2) 2. Socket plug (4)
Figure 75
1
2