Service Manual

Groundsmaster 360 Hydraulic SystemPage 4 − 85
12.Remove three (3) shorter (45 mm) and two (2) longer
(95 mm) flange head screws that secure pump body to
center case. Remove pump body from center case.
1. Pump body 2. Center case
Figure 76
2
1
13.Remove two (2) pins that locate pump body. Remove
and discard O−rings.
1. Pin 2. Pump body
Figure 77
2
1
1
14.Slide outer and inner charge pump rotors from RH
pump shaft. Remove key from key slot in pump shaft.
1. RH pump shaft
2. Outer pump rotor
3. Inner pump rotor
Figure 78
2
1
3
Hydraulic
System