Service Manual

MOWER DECKS
7 - 22 Mid-Size Walk Behind Service Manual
4. Remove the 6 nuts and carriage bolts securing the
spindle housing to the deck (Figure 201).
Figure 201
0819-18
5. Place the spindle in a vise and remove the nut,
washer, pulley, and housing from the spindle
(Figure 202).
Figure 202
0819-23
6. Remove the washer from the lower bearing and
slide the bearing from the housing (Figure 203).
Figure 203
0819-25
7. Slide the upper bearing and bearing spacer from
the housing.
8. Reverse the above steps to reassemble.