Operator's Manual

6
1
2
3
4
5
Figure 5
1. Hood stop
2. Spacer
3. Washer
4. Locknut
5. Washer
6. Open hood and position bag around inner frame of
upper support tube assembly (Fig. 6).
Figure 6
1. Hood
2. Bag
3. Inner frame of upper
support tube assembly
4. Bag drawstring
5. Metal clip
7. Pull bag drawstring cord tightly around frame to hold
bag and secure with metal slip (Fig. 6).
8. Install chute extension provided with kit. Attach chute
extension to grass catcher hood with (2) nut plates, (4)
button head screws, using existing mounting holes
(Fig. 7)
Mount Blower Housing Chute
1. Set deck to desired height–of–cut setting.
2. Slide chute over blower opening and onto mounting
studs (Fig. 7).
Figure 7
1. Grass catcher hood
2. Chute extension
3. Nut plate
4. Button head screw
3. Lower hopper hood and align chute with snout. Secure
chute in position with locknuts and brackets. Wide end
of brackets to be positioned toward rear (Fig. 8).
Figure 8
1. Chute
2. Mounting studs
3. Mounting bracket