Service Manual

ELECTRICAL

9-48 Floating Deck Mid-Size Service Manual

Solenoid Switch Replacement

(Pistol Grip & T-2)

Solenoid Switch Removal (P.G. & T-2)

1. Turn the engine off and remove the key from the

ignition.

2. Disconnect the negative battery cable from the

battery.

3. Remove the nut and lock washer securing the starter

cable to the solenoid terminal. Remove the starter

cable (Fig. 1548).

4. Pull the boot back and remove the nut and lock

washer securing the battery cable to the solenoid

terminal. Remove the battery cable (Fig. 1549).

Fig 1548 PICT-1920

Fig 1549 PICT-1880

5. Remove the harness wire from the solenoid terminal

(Fig. 1550).

Fig 1550 PICT-1882