Service Manual

LINKAGE

4-132 Floating Deck Mid-Size Service Manual

Control Bar Adjustment (T-Bar)

1. Initially adjust the control rods so that 2 1/4”

(5.715cm) of thread extends beyond the trunnion

ﬁ ttings (Fig. 0780).

3. Engage the control bar (Fig. 0782).

Fig 0780 PICT-5303

Fig 0782 PICT-5314a

4. Using a ruler, measure the travel distance of the

pulley while releasing and engaging the control bar.

The travel distance should be approximately 3/4”

(19mm) (Fig. 0783).

Note: If the pulley travel is more the 3/4” (19mm),

the brakes must be adjusted. Refer to

“Checking the Brake”, page 5-9.

2. The control bar and upper handle must be parallel

when in the relaxed drive and brake positions (Fig.

0781).

Fig 0783 PICT-5324a & 5326a

Fig 0781 PICT-5332a

A. 3/4” (19mm)