Service Manual

LINKAGE

4-123Floating Deck Mid-Size Service Manual

4. Adjust the length of the neutral stud and yoke as-

sembly so the clevis pin does not contact the back of

the slot in the control arm bracket (Fig. 0767).

5. Tighten the nut against the yoke (Fig. 0767).

Hydro Control Linkage Adjustment

Engine must be running so control linkage ad-

justments can be performed. Contact with mov-

ing parts or hot surfaces may cause personal

injury.

Keep hands, feet, face, clothing and other body

parts away from rotating parts, mufﬂ er and other

hot surfaces.

Mechanical or hydraulic jacks may fail to sup-

port machine and cause a serious injury.

• Use jack stands when supporting machine.

• Do not use hydraulic jacks.

3. Loosen the nut against the yoke (Fig. 0767).

Fig 0767 ﬁ g. 46 G001965

A. Neutral control linkage E. Slot in control arm

B. Yoke bracket

C. Neutral stud F. Clevis pin

D. Nut against yoke G. Clevis pin does not

contact the back of slot