Service Manual

CHASSIS

3-26 Floating Deck Mid-Size Service Manual

7. Inspect the pulleys for wear and damage. Replace

as necessary. If pulley replacement is required,

continue on. For belt replacement only, go to “Wheel

Drive Belt and Wheel Hub Installation” step 17, on

page 3-34.

8. Loosen the set screw securing the drive pulley to the

transmission (Fig. 0095).

10. Remove the key from the drive pulley shaft keyway

(Fig. 0097).

Fig 0095 PICT-1580

Fig 0097 PICT-1583

11. Inspect the key and replace it if it is worn or damage.

12. Apply anti-seize to the transmission drive shaft (Fig.

0098).

9. Slide the drive pulley off the transmission drive shaft

(Fig. 0096).

Fig 0098 PICT-1586

Fig 0096 PICT-1582