Service Manual

ELECTRICAL

9-34 Floating Deck Mid-Size Service Manual

Operator Presence Control (OPC)

Switch Replacement (Pistol Grip)

OPC Switch Removal (P.G.)

5. Position the manual tube to the cover bracket. Install

2 screws securing the manual tube assembly to the

control panel and control bracket (Fig. 1496).

7. Connect the negative battery cable to the battery.

Note: The harness has been unplugged from the

PTO switch for photo purposes.

Fig 1496 PICT-1839

1. Turn the engine off and remove the key from the

ignition.

2. Disconnect the negative battery cable from the

battery.

3. Remove the fuse blocks from the control panel cover

bracket (Fig. 1498).

6. Slide the fuse block(s) onto the control panel cover

bracket (Fig. 1497).

Fig 1498 PICT-1836

Fig 1497 PICT-1836