Service Manual

LINKAGE
4-76 Floating Deck Mid-Size Service Manual
4
9. Insert a clevis pin into each side of the control pivot
assembly securing it to the handle assembly (Fig.
0585).
11. Install 2 rubber grommets (1 on the left, 1 on the
right) into the T-Bar mounting holes (Fig. 0587).
Fig 0585 PICT-1712
Fig 0587 PICT-1708a
12. Install the OPC switch into the switch housing on the
T-Bar (Fig. 0588).
10. Install a cotter pin into each of the clevis pins (Fig.
0586).
Fig 0588 PICT-1707
Fig 0586 PICT-1710