Service Manual

MOWER DECKS

8-7Floating Deck Mid-Size Service Manual

PTO Drive Belt Installation

(40”, 48”, 52” and 60” Mower Decks)

7. Raise the machine to access the underside.

8. Remove the PTO drive belt from around the clutch

pulley and the idler pulley and remove it from the

machine (Fig. 1167).

3. Lower the machine to access the top of the mower

deck.

4. Roll the PTO drive belt onto the center spindle pulley

(Fig. 1169).

Fig 1167 PICT-1028

Fig 1169 PICT-1026a

5. Rotate the belt guide into place so that it is approxi-

mately 1/8” (3mm) away from the PTO drive belt

(Fig. 1170).

1. Raise the machine to access the underside.

2. Route the PTO drive belt around the clutch pulley

and the idler pulley (Fig. 1168).

Fig 1170 PICT-1031

Fig 1168 PICT-1030a