Service Manual

GEAR DRIVE

7-9Floating Deck Mid-Size Service Manual

7. Remove the retaining ring from the end of the trans-

mission drive shaft (Fig. 1078).

Fig 1078 PICT-1510

8. Loosen the set screw securing the transmission

driven pulley to the transmission driveshaft (Fig.

1079).

10. Remove the key from the transmission driveshaft

keyway (Fig. 1081).

Fig 1079 PICT-1511

Fig 1081 PICT-1513

9. Slide the driven pulley off the transmission drive

shaft (Fig. 1080).

Fig 1080 PICT-1512