Service Manual

CHASSIS

3-60 Floating Deck Mid-Size Service Manual

Castor Wheel Fork Bushing

Replacement

Castor Wheel Fork Bushing Removal

4. Remove the spacer(s) from the top of the caster

wheel fork (Fig. 0228).

Fig 0228 PICT-1317

5. Slide the caster wheel fork assembly out of the

mounting tube. Leave the spacer(s) on the bottom

of the fork (Fig. 0229).

Note: Note the location and number of the spacers

on each fork to ensure correct installation,

and maintain a level deck.

1. Turn the engine off and remove the key from the

ignition.

2. Raise the carrier frame assembly so the caster

wheels are off the ﬂ oor and support the front of the

mower with jack stands.

3. Remove the locking pin from the top of the caster

fork (Fig. 0227).

Fig 0229 PICT-1319

Fig 0227 PICT-1316

The following procedures are the same for replacing

both the right hand and left hand castor wheel fork

bushings.