Service Manual

LINKAGE

4-125Floating Deck Mid-Size Service Manual

Note: Make sure ﬂat part of linkage is perpendicular

to the pin of swivel (Fig. 0769).

Fig 0769 ﬁ g. 47 G001735

Note: If inconsistent neutral occurs, check to be

sure both springs are properly tightened on

the speed control lever under the console,

especially the rear pivot spring. Repeat above

adjustments if necessary (Fig. 0770).

12. After adjusting the left hydro control linkage, move

the speed control lever forward and then back to the

neutral position.

13. Make sure the speed control lever is in the neutral

position and the tire does not rotate.

14. Repeat the adjustment if needed.

Fig 0770 ﬁ g. 49 G001520

15. Tighten the front nut on left hydro control linkage

shown in Fig. 0768.

A. Hydro control linkage C. Incorrect position

B. Swivel D. Correct position

A. Speed control lever C. Spring

B. Rear pivot spring

90 Degrees