Installation Instructions

3
7. Install the blades, anti-scalp cups, and blade bolts
(Fig. 3). Tighten the blade bolts to 85–110 ft.-lb.
(115–149 N⋅m).
Important The curved part of the blade must be
pointing toward the inside of the cutting unit to ensure
proper cutting.
1
2
3
Figure 3
1. Blade bolt
2. Anti-scalp cup
3. Blade
8. Rotate the blades to make sure there is no interference.
9. Tighten all the mounting nuts.
10. Affix an identification decal to the top of the mower
deck near the serial plate (Fig. 4). Make sure the
mounting surface is clean.
Affix this identification decal, part no. 115–1408 onto
62 inch mower decks.
1
Figure 4
1. Identification decal