Operator's Manual

BrakeMaintenance
AdjustingtheParkingBrake
InterlockSwitch
1.Stopthemachine,movethedeckliftswitchfullyinto
theneutral-lockedposition,settheparkingbrake,and
removetheignitionkey.
2.Removetheboltssecuringthefrontpanelandremove
thepanel(
Figure52).
1
2
G020875
Figure52
1.Bolts
2.Controlpanel
3.Loosenthe2jamnutssecuringtheparkingbrake
interlockswitchtothemountingbracket.
Figure53
1.Brake-shaftsensor
3.Parking-brake-interlock
switch
2.Jamnuts
4.5/32inch(3.9mm)
4.Movetheswitchupordownonthebracketuntilthe
distancebetweenthebrakeshaftsensorandtheswitch
plungeris5/32inch(3.9mm)(Figure53).
Note:Makesurethatthebrake-shaftsensordoesnot
contacttheswitchplunger.
5.Securetheswitchjamnuts.
6.Testtheadjustmentasfollows:
A.Ensurethattheparkingbrakeisengagedandyou
arenotsittingontheseat,thenstarttheengine.
B.Movethecontrolleversoutoftheneutrallocked
position.
Theengineshouldstop.Ifnot,recheckthe
adjustmentyoumadetotheswitch.
7.Installthefrontpanel.
48