Operator's Manual
Daily Maintenance: (duplicate this page for routine use)
Check proper section of Operator's Manual for fluid specifications
Maintenance
C
Daily Maintenance Check For Week Of _________________
Check Item b
MON TUES WED THURS FRI SAT SUN
n Safety Interlock Operation
n Brake Operation
n Engine Oil Level
n Fuel Level
n Cooling System Fluid Level
Drain Water/Fuel Separator
n Air Filter Restriction Indicator
n Radiator & Screen for Debris
1
n Unusual Engine Noises
2
n Unusual Operating Noises
n Hydraulic System Oil Level
n Hydraulic Hoses for Damage
n Fluid Leaks
n Tire Pressure
n Instrument Operation
n Cutting Unit Safety Doors
n Height–of–Cut Adjustment
n Clean Deck Belt area
1
n Condition of Blades
Lubricate All Grease Fittings
3
Touch–up Damaged Paint
1
= Use only low pressure compressed air for debris removal.
2
= Check glow plug and injector nozzles, if hard starting, excess smoke or rough running is noted.
3
= Immediately after every washing, regardless of the interval listed.
Inspection performed by_____________________________
Item Date Information
1
2
3
4
5
6
7
8