Operator's Manual

Figure24
1.Damperlink
Figure25
AdjustingtheSkids
Theskidsshouldbemountedinthelowerposition
whenoperatingatheightsofcutgreaterthan2-1/2
inches(64mm)andinthehigherpositionwhen
operatingatheightsofcutlowerthan2-1/2inches(64
mm).
Note:Whentheskidsbecomeworn,youcanswitch
theskidtotheoppositesidesofthemower,ipping
themover.Thiswillallowyoutousetheskidslonger
beforereplacingthem.
1.Loosenthescrewatthefrontofeachskid
(
Figure26).
Figure26
2.Removetheange-headboltsandnutsfromeach
skid(Figure26).
3.Moveeachskidtothedesiredpositionandsecure
themwiththeange-headboltsandnuts.
Note:Onlyusethetoporcentersetsofholesto
adjusttheskids.Thebottomholesareusedwhen
switchingsidesatwhichtimetheybecomethetop
holesontheothersideofthemower.
4.Torquethescrewatthefrontofeachskidto80to
100in-lb(9to11N⋅m).
AdjustingtheCuttingUnitRollers
Thecuttingunitrollersshouldbemountedinthelower
positionwhenoperatinginheightofcutsgreaterthan
2-1/2inches(64mm)andinthehigherpositionwhen
operatinginheightofcutslowerthan2-1/2inches(64
mm).
1.Removetheboltandnutsecuringthegagewheelto
thecuttingunitbrackets(
Figure27).
Figure27
1.Gagewheel
2.Aligntherollerandspacerwiththetopholesinthe
bracketsandsecurethemwiththeboltandnut.
26