Service Manual

Mid-Size Walk Behind Service Manual 5 - 11
HYDRAULIC DRIVE SYSTEMS
Figure 86 0610-01
Figure 87 0610-02
Perform the following linkage
adjustments in the order that they are listed.
Neutral Control Linkage Adjustment
(Pistol Grip Floating Deck)
1. Raise the rear of the machine onto jack stands to
raise the drive wheels off the ground.
2. Start the engine and move the throttle to the full
throttle position.
3. Place the neutral locks in the full forward position
and move the speed control lever to the medium
speed position.
Important
WARNING
Engine must be running so control linkage
adjustments can be performed. Contact with
moving parts or hot surfaces may cause personal
injury.
Keep hands, feet, face, clothing and other body
parts away from rotating parts, muffler and other
hot surfaces.
WARNING
Mechanical or hydraulic jacks may fail to support
machine and cause a serious injury.
• Use jack stand when supporting machine.
• Do not use hydraulic jacks.