Operator's Manual

finger-tight onto the filler neck. Unscrew the the dip-

stick and check the level of oil. If the level is not up to

the FULL mark on the dipstick (Fig. 5), add enough oil

to raise the level to the mark. DO NOT OVERFILL.

3. Screw the dipstick filler cap finger-tight onto the filler

neck.

4. Lower the implement.

The following fluids are recommended for use:

ISO type 46/68 anti-wear hydraulic fluid

Mobil Mobil Fluid

424

Amoco Amoco

1000

International Harvester Hy-

Tran

Texaco

TDH

Shell Donax

Union Oil Hydraulic/Tractor

Fluid

Chevron Tractor Hydraulic

Fluid

BP Oil BP HYD

Boron OIl Eldoran

UTH

Exxon Torque

Fluid

Conoco Power-Tran

Kendall Hyken

052

Phillips HG

Fluid

Note: The fluids within this group are interchangeable.

IMPORTANT: Do Not Use Biodegradable Hydraulic

Fluid.

IMPORTANT: Use only types of hydraulic fluids speci-

fied. Other fluids could cause system damage.

Note: A red dye additive for detecting leaks in the

hydraulic system is available in 19.8ml bottles. One

bottle is sufficient for 16–23 l. of hydraulic fluid. Order

Part No. 44-2500 from your Authorized Toro

Distributor

Figure 5

1. Dipstick cap