Service Manual

ENGINE
3 - 2 Mid-Size Walk Behind Service Manual
11. Separate the electric clutch connector and push
the connector and grommet through the frame
(Figure 7).
Figure 7
0819-30
12. Remove the air cleaner cover.
13. Then remove the clamps holding the throttle and
choke cables to the engine (Figure 8). Mark the
cable housings for the clamp locations to assist in
reassembly. Remove the throttle and choke
cables.
Figure 8
0602-10
14. Remove the drive pulleys.
15. If the unit is up, no need to remove the deck
covers.
16. Remove deck drive belt from deck idler and drive
pulley (Figure 9).
Figure 9
mvc-412
17. Remove hydro pump drive belt (Figure 10).
Figure 10
mvc-415
(A) Choke (B) Throttle
A
B