Service Manual

MOWER DECKS
7 - 8 Mid-Size Walk Behind Service Manual
4. Loosen the belt guide for the rear idler (Figure
162).
Figure 162
0618-01
5. Remove the deck engagement pulley (Figure
162).
6. Route the new belt as shown on the diagram
located on the deck (Figure 163).
Figure 163
0616-05
7. Reverse steps 1 - 5 to complete the installation.
Mower Deck Belt Guide Adjustment
(Fixed Deck Models)
1. Stop the engine and remove the spark plug
wire(s).
2. Engage PTO.
3. Measure the clearance between the drive belt and
guide located under the frame (Figure 164).
Figure 164
0617-01
4. Loosen the guide mounting bolt and adjust the
guide to obtain 1-3/8” (35mm) clearance.
Replacing the Mower Belt (Fixed
Deck Gear Drive) 36 in. (91cm)
1. Disengage the blade control (PTO) lever and set
the parking brake.
2. Stop the engine and wait for all moving parts to
stop before leaving the operating position.
3. Remove the knobs and the belt cover on the
mower.
4. Remove the idler pulley and the belt (Figure 165).
5. Install the new mower belt.
6. Install the idler pulley.
(A) Engagement pulley (B) Belt guide
A
B
1-3/8”