Service Manual

HYDRAULIC DRIVE SYSTEMS
5 - 18 Mid-Size Walk Behind Service Manual
13. Remove the “E” clip from the pivot on the pump
control bellcrank (Figure 102).
Figure 102
0602-24
14. Remove the hairpin clip from the reverse rod on
the hand lever (Figure 103).
Figure 103
0602-29
15. Using a 5/16 8 point socket, loosen the set screw
securing the hydro control shaft to the pump
(Figure 104).
Figure 104
0602-21
16. Remove the shaft from the pump (Figure 105).
Figure 105
0602-31
Removal
Follow the removal procedures in reverse.