Service Manual

CHASSIS
4 - 16 Mid-Size Walk Behind Service Manual
Parking Brake Linkage (Pistol Grip
Hydro)
Removal
1. Remove the hairpin cotter retaining the lower link
to the brake shaft (Figure 59).
Figure 59
0602-36
2. To remove the idler spring, remove the nut and
bolt assembly from the brake mounting flange end
of the spring. Slip the opposite end of the spring
off the brake return lever (Figure 60).
Figure 60
0602-44
3. Remove the remaining bolts securing the parking
brake assembly to the rear frame.
4. Remove the bellcrank assembly.
5. Remove the hairpin clip from the upper linkage
rod and remove the rod from the bellcrank (Figure
61).
Figure 61
0602-39
6. Remove the 2 bolts securing the bellcrank to the
rear frame (Figure 62).
Figure 62
0602-46