Service Manual

Mid-Size Walk Behind Service Manual 4 - 9
CHASSIS
5. Remove the drive belt from the pulleys.
6. Remove the dust cover, cotter pin, nut, and
washer from the axle (Figure 38).
Figure 38
0819-03
7. Slide the hub with the pulleys and brake drum off
the axle (Figure 39).
Figure 39
0819-05
8. Inspect the brake drum. Replace it if is severely
scored.
9. Remove the hairpin cotter and disconnect the
brake rod from the brake arm (Figure 40).
Figure 40
0819-02
10. Pry off the push nut securing the brake arm to the
pivot (Figure 41).
Figure 41
0819-01