Service Manual

LINKAGE
4-97Floating Deck Mid-Size Service Manual
4
16. Position the right hand control lever so it aligns with
the left hand control lever (Fig. 0668).
Fig 0668 PICT-2112a
17. Rotate the handle stop lever cam until the gap
between the cam and the right hand control handle
is removed. Tighten the nut (Fig. 0669).
Fig 0669 PICT-2114
19. Install 2 screws securing the OPC switch and spacer
to the motion control lever assembly (Fig. 0671).
Fig 0671 PICT-2073a
18. Position the OPC switch and threaded spacer plate
onto the motion control linkage (Fig. 0670).
Fig 0670 PICT-2075