Operator's Manual

CheckingtheEngineDeckHeight
1.DisengagethePTOandsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Adjustthetirepressureinthereartirestospecications;
refertoDriveSystemMaintenance(page28).
4.MeasuretheenginedeckheightatlocationA(Figure
63).
Figure63
1.Backviewofmachine
3.Tires
2.Topofenginedeck4.Sameheightatlocations
AandB
5.MeasuretheenginedeckheightatlocationB(Figure
63).
6.IftheheightatlocationAandBarenotthesame,
changetirepressureslightlytomakethemthesame.
CheckingtheCarrierFrame
Front-to-RearPitch
Thecarrierframemusthaveapitchbetween3mm(1/8inch)
to9mm(3/8inch)overthelengthof61cm(24inches)on
thecarrierframe(Figure64).
1.Measureout61cm(24inches)onthecarrierframe
(Figure64).
Figure64
1.Carrierframe
4.HeightatlocationsAand
B
2.6-10mm(1/4-3/8inch)
pitchover61cm(24inch)
length
5.Casterwheel
3.61cm(24inches)6.Casterspacers
2.MeasurecarrierframeheightatlocationA(Figure64).
3.MeasurecarrierframeheightatlocationB(
Figure64).
4.TheheightatlocationAmustbea6mm-10mm
(1/4-3/8inch)lowerthanlocationB(Figure64).
5.Ifthecarrierframeisnotcorrect,movecasterspacers
tomakeita6mm-10mm(1/4-3/8inch))pitch
(Figure64).
Note:Movethespacersfromthetoporbottomto
makethecorrectpitch.
6.Thetirepressuremayalsobeadjustedslightlytomake
a6mm(1/4inch)pitch.
CheckingtheCarrierFrame
Side-to-SideHeight
Thecarrierframeneedstobeparallelside-to-sidefromthe
ground.
1.DisengagethePTOandsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Adjustthetirepressureinthereartirestospecications;
referto
DriveSystemMaintenance(page28).
4.MeasurecarrierframeheightatlocationA(
Figure65).
5.MeasurecarrierframeheightatlocationB(Figure65).
6.Ifthecarrierframeheightisnotthesamemovespacers
fromtoporbottomofcasterwheel,tomakeitlevel.
Thetirepressuremayalsobeadjustedslightlytomake
itlevel.
39