Service Manual

ELECTRICAL

9-55Floating Deck Mid-Size Service Manual

Kill Relay Replacement (T-2)

Kill Relay Removal (T-2)

2. Position the control panel cover/manual tube as-

sembly onto the control panel (Fig. 1573).

4. Connect the negative battery cable to the battery.

Note: The Manual Tube assembly and Control Panel

Cover Bracket have been removed for photo

purposes.

Fig 1573 PICT-1923

1. Turn the engine off and remove the key from the

ignition.

2. Disconnect the negative battery cable from the

battery.

3. Unplug the kill relay from the wire harness (Fig.

1575).

3. Install 4 screws (2 on the left, 2 on the right) secur-

ing the control panel cover to the control panel (Fig.

1574).

Fig 1575 PICT-1937

Fig 1574 PICT-1921