Service Manual

ELECTRICAL

9-52 Floating Deck Mid-Size Service Manual

OPC Switch Installation (T-2)

5. Remove the OPC switch and spacer plate (Fig.

1562).

2. Install 2 screws securing the OPC switch (and plate)

to the motion control assembly (Fig. 1564).

Fig 1562 PICT-1932a

Fig 1564 PICT-1928a

3. Position the right hand control lever in the operating

position. There should be a .10” (2.54mm) gap

between the switch plunger and the control arm tab

(Fig. 1565).

A. .10” (2.54mm) gap

1. Position the OPC switch and spacer plate onto the

motion control assembly plate (Fig. 1563).

Fig 1565 PICT-1934

Fig 1563 PICT-1932a