Service Manual

LINKAGE

4-130 Floating Deck Mid-Size Service Manual

Neutral Adjustment (T-2)

4. Loosen the wing nuts on the left control rod and

rotate the turnbuckle in or out to change the tracking.

Secure the turnbuckle in position with the wing nuts

(Fig. 0776).

5. Check for proper tracking. Adjust the left control rod

if a change is needed.

Important: Ensure the tracking of the mower is

correct after adjusting the motion control levers.

After adjusting the tracking, the motion control

levers may not align exactly front to back (Fig.

0777).

Fig 0777 ﬁ g. 52 G006096

1. If the machine does not track straight, adjustment is

required.

2. Check the rear tire pressure. Refer to Speciﬁ cations

for proper tire pressure.

3. Loosen the wing nuts on the right control rod and

rotate the turnbuckle in or out to ensure the right

side control lever is centered in the neutral lock

position. Secure the turnbuckle in position with the

wing nuts (Fig. 0776).

Fig 0776 ﬁ g. 36 G006085

Tracking Adjustment (T-2)

A. Turnbuckle C. Top wing nut (left hand

B. Bottom wing nut threaded)

A. Left motion control C. Neutral locked position

lever D. Align the control levers

B. Right motion control front to back here

lever