Service Manual

LINKAGE

4-37Floating Deck Mid-Size Service Manual

Operator Presence Control Lever

Installation

1. Install the Operator Presence Control (OPC) rod,

spring tab end ﬁ rst, through the left side of the

control panel and install the right end of the rod into

the opening on the right side handle bar. Sliding the

rod further through the right side handle bar opening,

install the left end of the rod through the left handle

bar opening (Fig. 0432).

3. Plug the wire harness into the PTO switch (Fig.

0434).

Fig 0432 PICT-0736

Fig 0434 PICT-0728

4. Install the extension spring onto the OPC rod and

the tab on the underside of the control panel (Fig.

0435).

2. Install the PTO switch into the control panel (Fig.

0433).

Fig 0435 PICT-0727

Fig 0433 PICT-0729a