Service Manual

GEAR DRIVE SYSTEM

7-9Fixed Deck Mid-Size Service Manual

6. Slide the transmission spline shaft into the RH

coupler (Fig. 850).

Fig 850 PICT-5091

7. Position the transmission so that the output shaft

drops through the opening in the chassis (Fig. 851).

Fig 851 PICT-5093

Fig 853 PICT-5104

9. Install the coupler and coupler shield to the left

transmission output shaft (Fig. 853).

Note: Align the 2 grease ﬁ ttings.

Fig 852 PICT-5099

8. Install 2 bolts and nuts to secure the ﬂ ange bearing

to the chassis (Fig. 852).