Service Manual

GEAR DRIVE

7-24 Floating Deck Mid-Size Service Manual

24. Install a retaining ring onto the end of the transmis-

sion drive shaft (Fig. 1139).

Fig 1139 PICT-1510

25. Route the drive belt onto the transmission driven

pulley (Fig. 1140).

23. Tighten the set screw securing the transmission

driven pulley to the transmission driveshaft (Fig.

1138).

Fig 1140 PICT-1575

Fig 1138 PICT-1511

22. Slide the driven pulley onto the transmission drive

shaft (Fig. 1137).

Fig 1137 PICT-1571